XTS5000 Paging help

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

Post Reply
ems170
Posts: 11
Joined: Sat Sep 23, 2006 5:25 pm

XTS5000 Paging help

Post by ems170 »

I am currently trying to set up paging on an xst5000. I have it working with all paging tones but one. This tone does not use standard quick call timing which I believe to be the problem. This non standard tone does decode fine on ht750's and ht1000's however I cant seem to get a decode on the xts. I am using 12.00.1 firmware. Like I said all other tones are decoding fine. Is there some setting that I am missing to make the radio decode non standard tones?

Tone
539.0 1.25 sec
pause .25 sec
600.9 1.0 sec
Top
Post Reply

Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”