XTL 5000 O5 Head MIC Connector Pin-Out

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

Post Reply
User avatar
motorola-radio
Posts: 87
Joined: Mon Nov 28, 2005 11:45 pm

XTL 5000 O5 Head MIC Connector Pin-Out

Post by motorola-radio »

What is the pin-out of the XTL 5000 O5 head's MIC connector ? (Not the high power CGAI)
Thanks !
Top
User avatar
GEMOTO
Posts: 415
Joined: Fri Jan 09, 2004 6:15 pm

Re: XTL 5000 O5 Head MIC Connector Pin-Out

Post by GEMOTO »

Pin Function
1 1 Wire
2 PTT
3 Speaker
4 USB_D-/RXD
5 Ground
6 VBus
7 Mic Hi
8 GPIO_1/USB_D+/TXD
9 HUB/Key Fail
10 GPIO_0/PWR_On

Image
Top
User avatar
motorola-radio
Posts: 87
Joined: Mon Nov 28, 2005 11:45 pm

Re: XTL 5000 O5 Head MIC Connector Pin-Out

Post by motorola-radio »

If I want to modify the HKN6155 Flash/programming cable use at O5 MIC connector,how to connect that pins TX,RX,RTS and CTS ?
Thanks !
Top
akardam
Posts: 2251
Joined: Thu Mar 04, 2004 10:53 am

Re: XTL 5000 O5 Head MIC Connector Pin-Out

Post by akardam »

Not sure why you'd want to butcher a perfectly good HKN6155 to get a GCAI programming cable when you can get a HKN6184 USB GCAI cable for $45...
Top
Post Reply

Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”