cdm750 programmable accessory connector?

[Jay]

Are the pins on the accessory connector programmable as they are on the CDM1250 or 16 channel GM300? I know I've seen some older stuff like 8 channel GM300s and M120s that didn't allow it...So just curious about the CDM750.

Thanks
Jay

[HLA]

they should be the same as the 1250's. open a codeplug and use the drop down boxes and they will tell you what each one can do

[john9912]

CDM750 accessory pins are very programmable. They are more programmable than the 8 channel GM300 or M110/M120/M130 radios. They are even a little more programmable than a 16 channel version GM300. One tip, don't rely on the drop down preprogrammed selections to be exactly what you want. Double check all the settings for all the pins.

[PETNRDX]

My two cents.
As said above, the are very programmable.
Lots of things that the Maxtrac/Radius/GM wouldn't do.
I agree with the above post, go thru and check the all to be sure on the settings.
Careful with the IGN SENSE, if you program it wrong, the radio won't power up without the accessory plug, radio will act "dead".