XTVA and XTS3000

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

Post Reply
luminoxs
Posts: 12
Joined: Mon Sep 04, 2006 1:58 pm

XTVA and XTS3000

Post by luminoxs »

What would cause an XTVA with a HHCH to not fully work with an model 3 XTS3000? With the HHCH, the side buttons and LCD work but none of the front buttons (vol, mode, home and soft keys) will work. When they are pressed, you get a bonk. A XTS5000 works without an issue. Has anyone else have had this issue? Any help or suggestions would be appreciated!

Thanks
Top
User avatar
n7maq
Posts: 1440
Joined: Tue Nov 27, 2001 4:00 pm
What radios do you own?: Mocom 70 w/scan!!

Re: XTVA and XTS3000

Post by n7maq »

luminoxs wrote:What would cause an XTVA with a HHCH to not fully work with an model 3 XTS3000? With the HHCH, the side buttons and LCD work but none of the front buttons (vol, mode, home and soft keys) will work. When they are pressed, you get a bonk. A XTS5000 works without an issue. Has anyone else have had this issue? Any help or suggestions would be appreciated!

Thanks
The radio does have newer firmware in it R07.71.00/N08.03.03 and the flash is 599108-1C5E00-1


It used to be one of mine.


Jim
Top
jmr061
was KB9KST
Posts: 3176
Joined: Fri Sep 14, 2001 4:00 pm

Re: XTVA and XTS3000

Post by jmr061 »

The radio codeplug contains data to support the HHCH and it sounds like it doesn't have the proper info in it. I have seen this in hacked and non hacked models. You will need an s-rec with it set up properly or you will need someone with the know how to modify your exisiting codeplug. The settings I refer to are NOT viewable in normal cps/rss.

Jason
Top
Post Reply

Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”