HT1250 Stuck in Scan Mode

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
NHEMT42
New User
Posts: 2
Joined: Fri May 08, 2009 8:35 am

HT1250 Stuck in Scan Mode

Post by NHEMT42 »

I was hoping with all the brains around here someone could help me out.

I just got myself a used HT1250 and have programmed it. The problem is when in my first zone it seems to be stuck in a scan mode (I cannot turn it off using the key programmed to or the menu) and it is stuck in scan on the first channel of the second zone.

Any ideas?

Thanks in advance.
User avatar
fineshot1
Posts: 1125
Joined: Wed Oct 12, 2005 5:13 am

Re: HT1250 Stuck in Scan Mode

Post by fineshot1 »

That conventional personality(on the first channel of the second zone) under the scan tab must have the "Auto Scan" box checked.

Is so uncheck it and reprogram and you should be good to go.
fineshot1
NJ USA
NHEMT42
New User
Posts: 2
Joined: Fri May 08, 2009 8:35 am

Re: HT1250 Stuck in Scan Mode

Post by NHEMT42 »

Wow, how I missed that I don't know but thanks so much for the answer!
User avatar
fineshot1
Posts: 1125
Joined: Wed Oct 12, 2005 5:13 am

Re: HT1250 Stuck in Scan Mode

Post by fineshot1 »

NHEMT42 wrote:Wow, how I missed that I don't know but thanks so much for the answer!
No problem. Always happy to help out when i can.
fineshot1
NJ USA
Post Reply

Return to “Radio Programming”