Astro Saber Programming Woes

[SYNTORX71MAN]

Hi Gang,

I need some input here, bought an auction house Astro Saber 3, yea I should know better...LOL

Specs are:
H04SDH9PW7AN
599108-5F4600-1 Flash
07.24.00.00 Firmware
I08.03.02 DSP
1 Meg

Using R05.00.02 Astro Saber CPS, I am trying to input conventional frequencies in the Transmit and Receive field.
But here is the catch, under the general tab conventional personalities, It shows a Red Invalid field and will only let me select 5 different freqs in a drop down menu box for the TX and RX. Is there a setting I need to change under the Trunking tab or something to eliminate this problem?

[Tom in D.C.]

Click the green cross at the bottom of the screen and every time you do so you will add another personality.

[SYNTORX71MAN]

No Dice Tom, I added new personalities and zones, all still have the same issue

[akardam]

Sounds kind of like you have the frequency picklist enabled.

Check under View > Options > Frequency Options

If "Enable Frequency Picklists" is checked, uncheck it, close CPS, re-open, and re-read or open your codeplug.

[SYNTORX71MAN]

Ah ha, I knew the Astro Zen masters would enlighten me. Mystery Solved.

Thank You One and All!!!

P.