iDEN RSS for a mobile radio
Moderator: Queue Moderator
-
- Posts: 259
- Joined: Thu Aug 19, 2004 9:48 pm
- What radios do you own?: Little Tikes walkie-talkie
iDEN RSS for a mobile radio
The model number is M12UCH6RR6AN with a remote mount handset. I'm trying to figure out how to program this thing. Currently active on the Telus Mike network, but we need to change the names in the phone list. Nobody has a clue including our dealer who just wants to sell us a new phone.
From the RSS spreadsheet on MOL, looks like there's only one CPS for the entire series of iDEN phones. Is that correct?
The antique-but-still-works-great contraption looks like it's based on an MCS M1 housing with the remote coming off the DB25 on the bottom. The handset's base has a DB-15 for accessories and the handset itself plugs in RJ-45. What do I need for my RIB?
Thanks for any help...
From the RSS spreadsheet on MOL, looks like there's only one CPS for the entire series of iDEN phones. Is that correct?
The antique-but-still-works-great contraption looks like it's based on an MCS M1 housing with the remote coming off the DB25 on the bottom. The handset's base has a DB-15 for accessories and the handset itself plugs in RJ-45. What do I need for my RIB?
Thanks for any help...
Re: iDEN RSS for a mobile radio
To get into the menu hit * # 20 (phone list) *#21 (ID list) *#22 (Talkgroup)videonerd wrote:The model number is M12UCH6RR6AN with a remote mount handset. I'm trying to figure out how to program this thing. Currently active on the Telus Mike network, but we need to change the names in the phone list. Nobody has a clue including our dealer who just wants to sell us a new phone.
From the RSS spreadsheet on MOL, looks like there's only one CPS for the entire series of iDEN phones. Is that correct?
The antique-but-still-works-great contraption looks like it's based on an MCS M1 housing with the remote coming off the DB25 on the bottom. The handset's base has a DB-15 for accessories and the handset itself plugs in RJ-45. What do I need for my RIB?
Thanks for any help...
You need Iden RSS (there is only one) and I would assume the new Super Agent RSS should still work with the M370. The programming cable goes into the bottom port. You will need to unplug the acc cable to use RSS with it, you will need a RIB also. Drop me a PM, or email if you have any more questions, it has been a few years but we used to maintain several fleets with the M370's. The total number was well over 1000 units that we covered, and they were fairly reliable.
Jim
Re: iDEN RSS for a mobile radio
Will the M370 crossfleet? I don't recall it was on the list of things that would.
-Alex
-Alex
The Radio Information Board: http://www.radioinfoboard.com
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
Re: iDEN RSS for a mobile radio
No it will not. From what I have been told there was enough memory but Nextel did not want to pay to have the correct firmware updated.alex wrote:Will the M370 crossfleet? I don't recall it was on the list of things that would.
-Alex
We still have a few out there, but when they die, you can't get them to swap you out no one at sprint know what an IMEI is. The last one I was able to get swapped took a few weeks to talk to someone that knew what she was doing and we had no problem then. There is a newer mobile based on the i710, the M710 and it is SIM based and it will do cross fleet, but it's still only .6 watt output.
Jim
Re: iDEN RSS for a mobile radio
I didn't think they did. Nextel doesn't complain about them not having GPS? Or does that requirement not exist since it's considered radio w/telephone interconnect...n7maq wrote:No it will not. From what I have been told there was enough memory but Nextel did not want to pay to have the correct firmware updated.alex wrote:Will the M370 crossfleet? I don't recall it was on the list of things that would.
-Alex
We still have a few out there, but when they die, you can't get them to swap you out no one at sprint know what an IMEI is. The last one I was able to get swapped took a few weeks to talk to someone that knew what she was doing and we had no problem then. There is a newer mobile based on the i710, the M710 and it is SIM based and it will do cross fleet, but it's still only .6 watt output.
Jim
Alex
The Radio Information Board: http://www.radioinfoboard.com
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
Re: iDEN RSS for a mobile radio
Nextel will not support the M370 any more. No GPS is one reason, of course the IMEI and service key requirements are another, and now with most all of Nextel's (I hate to cal them Sprint) iden sites have 900MHz overlays. The 900MHz has caused a lot of issues for larger users with BDA's. Most of the BDA's are only cover the 800MHz SMR band.
Jim
Jim
Re: iDEN RSS for a mobile radio
Yup, it's cool to have full bars, dial a number, press send, and watch the signal level die because the 800 MHz control channel has dumped me off onto a 900 MHz channel that my mobile BDA doesn't support. When I am doing a job somewhere on the fringe I'll put my SIM in an i60 because it will only do 800 MHz. I loose the address book but at least the phone will work great.n7maq wrote:Nextel will not support the M370 any more. No GPS is one reason, of course the IMEI and service key requirements are another, and now with most all of Nextel's (I hate to cal them Sprint) iden sites have 900MHz overlays. The 900MHz has caused a lot of issues for larger users with BDA's. Most of the BDA's are only cover the 800MHz SMR band.
Jim
Wyrd bið ful ãræd, Fate is inexorable...
-
- Posts: 259
- Joined: Thu Aug 19, 2004 9:48 pm
- What radios do you own?: Little Tikes walkie-talkie
Re: iDEN RSS for a mobile radio
Neat.. more than I ever wanted to know.
Thanks!
We'll see how the keypad programming goes, I think age has gotten the pads underneath the keys and some of 'em don't work, others require a finger-numbing hard press. That said, perhaps anyone have a handset laying around they'd like to sell?

We'll see how the keypad programming goes, I think age has gotten the pads underneath the keys and some of 'em don't work, others require a finger-numbing hard press. That said, perhaps anyone have a handset laying around they'd like to sell?

-
- Posts: 36
- Joined: Sat Nov 29, 2008 5:11 pm
- What radios do you own?: Sabers, homebrew scanners
Re: iDEN RSS for a mobile radio
Just curious.. Does the m370 support AMBE vocoders as well?
Re: iDEN RSS for a mobile radio
No, VSELP only.turbovectorz wrote:Just curious.. Does the m370 support AMBE vocoders as well?
Jim