Hey all,
is there a way to adjust the screen on the Model 2 and 3 jedi's? As it is right now I have to tilt the radio back to read the screen and it's a pain in the neck. I wasn't sure if it was similar to the Astro Sabers where you have to go inside the radio and adjust it that way, or a different way.
thanks!
MTS2000 Model 2/3 Screen Resolution?
Moderator: Queue Moderator
-
MP 6.7
- Posts: 109
- Joined: Mon Aug 22, 2005 11:00 am
- What radios do you own?: Spectra, Maxtracs, MT2k, GP300
Re: MTS2000 Model 2/3 Screen Resolution?
Last time I had one open I seem to recall there being an adjustment pot next to the screen on the display/button board. I'm not sure if that's what it's for, but if someone can confirm I'd like to turn up my contrast a little too.
Dale
KE7CEU
Current radios
Mobiles: 3x D43 A7 Spectras, T83 A9 Spectra, 2x KLM and 2x KLN MCS2000's, D43 Maxtrac 32ch, D35 Maxtrac 6ch modded for 896MHz receive, M33 M1225 4ch, Lowband Maratrac on 6 meters
Portables: 2x VHF GP300, VHF P110, UHF P110, VHF A7 MT2000
KE7CEU
Current radios
Mobiles: 3x D43 A7 Spectras, T83 A9 Spectra, 2x KLM and 2x KLN MCS2000's, D43 Maxtrac 32ch, D35 Maxtrac 6ch modded for 896MHz receive, M33 M1225 4ch, Lowband Maratrac on 6 meters
Portables: 2x VHF GP300, VHF P110, UHF P110, VHF A7 MT2000
-
MTS2000des
- Posts: 3347
- Joined: Sat Jan 04, 2003 4:59 pm
- What radios do you own?: XTS2500, XTS5000, and MTS2000
Re: MTS2000 Model 2/3 Screen Resolution?
some of the older display boards had the adjustment pot for contrast, it's on the front side right above the display- but most of the Jedi's I have are newer and do NOT have such a pot on the board. You'll just have to open your MTS and carefully disassemble the front cover to access it. Then plug it into your radio while apart, power it up, and adjust to your preference if it's present.
The views here are my own and do not represent those of anyone else or the company, the boss, his wife, his dog or distant relatives.