I just recently purchased 2 JT-1000's. They are narrow band compliant but are not able to accept the 2.5khz channel steps that I need. A friend of mine has a DN version HT-1000 that will so I know some Jedi radios can. Is there any way to reprogram the code plug to allow me to program the new channel steps I need? I'm trying to program 151.3775. Not sure if I can change something with hex editor or maybe changing a board. We tried to just clone his personality to my radio with RSS but obviously it didn't work. Any help would be GREATLY appreciated.
73's
Mike
Change channel steps on JT-1000
Moderator: Queue Moderator
Re: Change channel steps on JT-1000
Unfortunatley, JT1000's will not take certain "splinter" frequencies even though they're closely related to the HT1000.
-
HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
Re: Change channel steps on JT-1000
i think your best bet is gonna be doing it with the rss, read the radio, go to the channel, hold the shift key and enter the whole freq, then write it to the radio and see if it takes it
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
-
MTS2000des
- Posts: 3347
- Joined: Sat Jan 04, 2003 4:59 pm
- What radios do you own?: XTS2500, XTS5000, and MTS2000
Re: Change channel steps on JT-1000
how old are they? I have a JT1000 with firmware V3.02, made in August 2002. Does narrowband (including the 2.5 and 6.25) channel steps just fine.
The views here are my own and do not represent those of anyone else or the company, the boss, his wife, his dog or distant relatives.
Re: Change channel steps on JT-1000
Not sure how old but the rev is 3.02.
-
RadioSouth
- Batboard $upporter
- Posts: 2884
- Joined: Mon Sep 03, 2001 4:00 pm
Re: Change channel steps on JT-1000
Confirm the frequency, my JT won't take it either but does other splinter channels.
Re: Change channel steps on JT-1000
Can you try and program 151.3775 and see if yours will take it? I think I may be looking for a new (to me) radio very soon.MTS2000des wrote:how old are they? I have a JT1000 with firmware V3.02, made in August 2002. Does narrowband (including the 2.5 and 6.25) channel steps just fine.