I have a radio that only takes 1550 head, a 220 Mhz radio, but I don't have any spare 1550 heads. Is there anyway to put
a 750 head on where it expects a 1550 head to be. Don't care if it only gets 4 working channels... Right now it's a door stop...
Thanks
Glen
CDM750 HEAD <-> CDM1550 HEAD
Moderator: Queue Moderator
Re: CDM750 HEAD <-> CDM1550 HEAD
Not that I am aware of. Any time that I have tried to put a wrong model head on, it shows a wrong control head error.ve1gln wrote:Is there anyway to put a 750 head on where it expects a 1550 head to be.
I don't think that I have tried a CDM750 head on a 1550. I will try and let you know.
-
RADIOMAN2002
- Posts: 1102
- Joined: Thu Apr 04, 2002 4:00 pm
- What radios do you own?: More than I can count
Re: CDM750 HEAD <-> CDM1550 HEAD
It is possible, you have to change the control head jumpers on the board. Look in the service manual, and compare the jumpers around the middle of the board. I have used 1250 heads on 1550's buy changing those jumpers. It apparently tells the head micro what version to send to the radio.