Having trouble getting my Pyramid to work right, It will tx but it will not receive.
I have my svr200 hooked up to a low band maxtrac according to there website the closet radio i found was the Motorola Radius Series w/ 16 pin accy connector however i have a 32 channel low band maxtrac with 16 pin connector is this right or should i be using a different set up to get the audio out of it?
svr200 not recieving
Moderator: Queue Moderator
-
Andy Brinkley
- Batboard $upporter
- Posts: 377
- Joined: Mon Sep 03, 2001 4:00 pm
- What radios do you own?: FMR80D and a Motrac with Scan
Re: svr200 not recieving
Application Note 160 pretty much covers tieing a SVR-200 to any of the radius/ maxtrac mobiles.
Make sure the jumpers are configured properly in the SVR-200, and make sure you have accessory connector pins on your mobile programmed correctly.
PM me if you need more help.
Make sure the jumpers are configured properly in the SVR-200, and make sure you have accessory connector pins on your mobile programmed correctly.
PM me if you need more help.
Andy / NC4AB
Re: svr200 not recieving
If you hook a local speaker to thew SVR do you get anything? Is the SVR's COR light on when it should be?
Jim
Jim