Jedi RSM on a Waris radio
Moderator: Queue Moderator
-
246
- New User
- Posts: 2
- Joined: Tue Jun 28, 2011 4:55 pm
- What radios do you own?: HT1000, HT1250, HT1550XLS
Jedi RSM on a Waris radio
Long story short - work forced me to downgrade from an HT1000 to an HT1250. Because I don't care for any of the speaker mics available for the Waris series, I bought an MC-2133 replacement cable from Pryme, which, in theory, should've allowed me to continue to use my 6191 mic with my new 1250. However, when I tried it with both my issued 1250 & my personal 1550, it just won't go. If I plug it in with the radio on, it keys up automatically, but neither the mic nor the speaker will work. If I plug it in with the radio off, it won't do anything at all. Tested both the mic & the accessory port, and both are OK. Suggestions?
-
FireCpt809
- Posts: 1848
- Joined: Sat Jan 19, 2002 4:00 pm
- What radios do you own?: Alot..
Re: Jedi RSM on a Waris radio
They may have the same plugs but the head or cable is wired differently.
-
246
- New User
- Posts: 2
- Joined: Tue Jun 28, 2011 4:55 pm
- What radios do you own?: HT1000, HT1250, HT1550XLS
Re: Jedi RSM on a Waris radio
My understanding is that the cable was designed to take that into account, and make the two compatible.FireCpt809 wrote:They may have the same plugs but the head or cable is wired differently.
Re: Jedi RSM on a Waris radio
OK, call the manufacturer and ask them why it's not working then246 wrote:My understanding is that the cable was designed to take that into account, and make the two compatible.FireCpt809 wrote:They may have the same plugs but the head or cable is wired differently.
-
Batwings21
- Posts: 930
- Joined: Fri Jun 23, 2006 11:21 am
Re: Jedi RSM on a Waris radio
That cable is for a pryme mic, it is not meant for a motorola mic the pinouts of the rj-45 are probably different.