XTS/XTL encryption module
Moderator: Queue Moderator
-
- Posts: 129
- Joined: Mon Sep 15, 2003 12:02 pm
XTS/XTL encryption module
Can an XTS5000 (ntn5032?) DES-XL module also be used for an XTL5000?
Re: XTS/XTL encryption module
Yes but the XTL uses a carrier board and shield in addition.
Jason
Jason
-
- Posts: 129
- Joined: Mon Sep 15, 2003 12:02 pm
Re: XTS/XTL encryption module
Ok - thanks
-
- Posts: 129
- Joined: Mon Sep 15, 2003 12:02 pm
Re: XTS/XTL encryption module
Does the XTL comes with the carrier board and shield as standard - or is it extra?
Re: XTS/XTL encryption module
It is extra.....
Jason
Jason
-
- Posts: 129
- Joined: Mon Sep 15, 2003 12:02 pm
Re: XTS/XTL encryption module
Ok - thanks - I think I will stick with the Astro Spectra...
Re: XTS/XTL encryption module
Its just a little metal shield, 4 little screws and a little pc board. Its inexpensive in moto dollars.
Lowband radio. The original and non-complicated wide area interoperable communications system


-
- Batboard $upporter
- Posts: 239
- Joined: Tue Jan 20, 2004 2:48 am
Re: XTS/XTL encryption module
hi
if an xtl mobile has the G298(hardware multikey option but no actual encryption in it does this mean that it has the carrier board? Also If I get a flea-bay xtl mobile and buy the crypto board and carrier if needed, does the radio need to be flashed to accept / recognise the new hardware?
thanks
if an xtl mobile has the G298(hardware multikey option but no actual encryption in it does this mean that it has the carrier board? Also If I get a flea-bay xtl mobile and buy the crypto board and carrier if needed, does the radio need to be flashed to accept / recognise the new hardware?
thanks
Re: XTS/XTL encryption module
It more than likely would not have the carrier board. When adding the encryption hardware it would need to be programmed to see the secure hardware and then a key programmed into it via a keyloader.Radiogeek97 wrote:hi
if an xtl mobile has the G298(hardware multikey option but no actual encryption in it does this mean that it has the carrier board? Also If I get a flea-bay xtl mobile and buy the crypto board and carrier if needed, does the radio need to be flashed to accept / recognise the new hardware?
thanks
Jason