VHF Astro Spectra IMBE issue

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

Post Reply
User avatar
glock318
1 Warning for RSS/CPS Wanted/For Sale/Links
Posts: 250
Joined: Sat Aug 21, 2004 7:52 pm

VHF Astro Spectra IMBE issue

Post by glock318 »

I recently Flashed a astro ready 1meg 12.5 VHF astro spectra 110w for IMBE operation. I saved all the tuning data and it seems that I have an issue receiving and transmitting any digital signal. It transmits and receives analog fine. But from what I under stood it may need tuning for the tx side but I shouldn't have an issue receiving correct as for there is nothing to tune on the rx side. Any suggestion to check? Thanks Josh
Top
jmr061
was KB9KST
Posts: 3176
Joined: Fri Sep 14, 2001 4:00 pm

Re: VHF Astro Spectra IMBE issue

Post by jmr061 »

What did it start out with for host/dsp and flashcode and what are the same things now?

Jason
Top
User avatar
d119
Posts: 3538
Joined: Tue Mar 19, 2002 4:00 pm

Re: VHF Astro Spectra IMBE issue

Post by d119 »

glock318 wrote:I recently Flashed a astro ready 1meg 12.5 VHF astro spectra 110w for IMBE operation. I saved all the tuning data and it seems that I have an issue receiving and transmitting any digital signal. It transmits and receives analog fine. But from what I under stood it may need tuning for the tx side but I shouldn't have an issue receiving correct as for there is nothing to tune on the rx side. Any suggestion to check? Thanks Josh
This isn't the one I sent you, is it?
Top
Post Reply

Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”