MTS2000 Fail 001 within its band

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
User avatar
NSPD
Posts: 1626
Joined: Sun Aug 04, 2002 4:52 pm
What radios do you own?: Motorola FR50!

MTS2000 Fail 001 within its band

Post by NSPD »

Hi guys... I have an MTS2000 Model I 403-470 (H01RDD9PW1BN) that I purchased with the intent of using it with my VRS for ham purposes, which I have set to a 2.5khz 423mhz frequency. The firmware is R05.53.

I have almost no RX down at the VRS frequency, and "F001" on transmit. The VRS frequency is well-within the rated bandsplit of the radio. Radio works just fine in the 440-470 range.

Any ideas? Possibly just an alignment needed?
Jake
Top
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Re: MTS2000 Fail 001 within its band

Post by Will »

It could be the VCO crossover setting(s) are not correct for the RF board version.
Top
Post Reply

Return to “Radio Programming”