I have just installed a licenced copy of the XTS3000 CPS, version 5.2.0.0 onto my Netbook. When I try to fire it up, I get an error message stating "The system cannot find the file specificed." It then shuts down and generates a Windows (XP) error message.
Am I missing a DLL or similar? If so which one?
Tks
R
XTS300 CPS Problems
Moderator: Queue Moderator
-
- Posts: 59
- Joined: Wed Nov 29, 2006 12:46 am
Re: XTS300 CPS Problems
I had the same problem with a customers netbook on Friday in Canberra. Problem was it would not under any circumstances work on anything unless it had XP or older. Windows Vista and Windows 7 gave me this exact error each time. Soon as it was installed on a dedicated xp netbook, eureka, works like a charm.
I was using 05.03.00
I was using 05.03.00
Re: XTS300 CPS Problems
To elaborate further for you Russell, I tried using a virtual PC with XP and also a dual boot machine with windows 7 and XP and it still did not work. Even when trying to run it in compatibility mode. As stated above, until it was installed on an XP dedicated machine, it would not work. Strange cause I have it running on my desktop with Windows 7 Ultimate with no problems, maybe it just has something to do with running on a netbook as I encountered?
Cheers
Cheers
-
- Posts: 59
- Joined: Wed Nov 29, 2006 12:46 am
Re: XTS300 CPS Problems
[quote="sheldon"]I had the same problem with a customers netbook on Friday in Canberra. Problem was it would not under any circumstances work on anything unless it had XP or older. Windows Vista and Windows 7 gave me this exact error each time. Soon as it was installed on a dedicated xp netbook, eureka, works like a charm.
I was using 05.03.00[/quote]
Therein lies the problem, this is an XP machine. I give up!
R
I was using 05.03.00[/quote]
Therein lies the problem, this is an XP machine. I give up!
R
- FireCpt809
- Posts: 1846
- Joined: Sat Jan 19, 2002 4:00 pm
- What radios do you own?: Alot..
Re: XTS300 CPS Problems
Did you download this off Motorola online? IF not that may be your problem. A copy that is "in the wild" may be missing components or be corrupted
- N4DES
- was KS4VT
- Posts: 1233
- Joined: Thu Dec 25, 2003 7:59 am
- What radios do you own?: APX,XTS2500,XTL2500,XTL1500
Re: XTS300 CPS Problems
Isn't there a service pack requirement of no less than 3 in XP?
It has been a while since I have read the computer requirements, but it is worth looking at.
It has been a while since I have read the computer requirements, but it is worth looking at.
Re: XTS300 CPS Problems
No, the problem is that there is no serial port installed on the computer and a usb to serial adapter has not been plugged in, so the CPS can't see a serial port and errors out. Install on a computer with a real serial port or plug in the usb to serial adapter so the CPS is fooled into thinking there's a com port on the computer.
-
- Posts: 59
- Joined: Wed Nov 29, 2006 12:46 am
Re: XTS300 CPS Problems
[quote="escomm"]No, the problem is that there is no serial port installed on the computer and a usb to serial adapter has not been plugged in, so the CPS can't see a serial port and errors out. Install on a computer with a real serial port or plug in the usb to serial adapter so the CPS is fooled into thinking there's a com port on the computer.[/quote]
Escomm, take a promotion to expert, that appears to be the problem. Once again thanks for the advice.
R
Escomm, take a promotion to expert, that appears to be the problem. Once again thanks for the advice.
R