Cdm1250 programming

[tcash158]

I need to ask if there is a way to copy a code plug from a cdm1250 45watt to a cdm1250 25watt? It says cannot clone model number mismatch, I know the models are different due to wattage but I want to use the same programming. Is this possible or can someone telle how to do this without writing the code if again?

[escomm]

Sorry it can't be done

[tcash158]

Is there anyway to cut and paste or copy fields so I don't forget something in the programming or anything to make it easier?

[Bill_G]

Print print print

or run two laptops side by side

happy happy joy joy

[HLA]

you can open two versions of the cps side by side and open both codeplugs at the same time and copy/paste that way?

[escomm]

you can open two versions of the cps side by side and open both codeplugs at the same time and copy/paste that way?

No, you can't

[HLA]

yes you can

[escomm]

No....... you can't. Seems you're confusing pro series with astro/astro25

[HLA]

nope, you can open and run two engines of the cdm1250 cps side by side and have a different codeplug open in each

[escomm]

Right, and you can't copy and paste between the two. This has been asked and answered so many times before. Manually typing the data in from one to the other is NOT copy and paste. I'm done arguing with you, as usual you have no idea what you're talking about. Stop doing the board a disservice and posting bad information.

[HLA]

NO, you can't drag & drop, you can copy / paste anything, highlight it and copy it then paste in the other