xtl 2500 FL01-90

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
kornelius
New User
Posts: 1
Joined: Tue Apr 02, 2013 5:45 am

xtl 2500 FL01-90

Post by kornelius »

I'm sorry if my english is not good. I have a Motorola XTL 2500. On screen display no message FL01-90. "MAINTENANCE MODE" Remote Device, can help me, how do I repair it? Thx for help.

Rgrds
Lius-Indonesia-North Sumatera
Jim202
Posts: 3609
Joined: Sun Sep 09, 2001 4:00 pm

Re: xtl 2500 FL01-90

Post by Jim202 »

kornelius wrote:I'm sorry if my english is not good. I have a Motorola XTL 2500. On screen display no message FL01-90. "MAINTENANCE MODE" Remote Device, can help me, how do I repair it? Thx for help.

Rgrds
Lius-Indonesia-North Sumatera



Some background on the installation would be helpful.

Is this a radio that has been installed and running that just came up with the error?

Is this a used radio that you just purchased and when you powered the radio up this is the error it shows?

Is this a radio that you have put together from parts? What I mean by this is the radio from one source and the control head from another source? If so, you probably have to do a radio and control head sync.

Have you made sure that the heavy power wires going to the radio (red and black wires) have the 12 volts on the. Maybe a bad fuse or the connector is not plugged into the radio.

Is this a trunk mount radio configuration? You need the control cable to go between the radio and the control head. You can try connecting the control cable to a different port on both the radio and the control head. Do one end at a time and try powering the radio up.

These are just some of the trouble shooting bits of information that you need to help with anyone on here trying to provide a solution to your problem.

Jim
Bigfella237
Posts: 152
Joined: Wed May 02, 2012 11:30 am

Re: xtl 2500 FL01-90

Post by Bigfella237 »

Jim et al,

Information from another forum is that the OP was writing a codeplug to an otherwise working radio and got a NextGen10 error halfway through the write, the control head then went FAIL 01/90 and that's all the information we've gotten so far?

I'm wondering if the infamous R17 CPS and a USB cable was the culprit?

Either way it looks to me like the corrupt write is now preventing the brick from booting up, hence the 01/90?

Andrew
cwfd336
New User
Posts: 4
Joined: Sun Jan 04, 2009 10:50 am

Re: xtl 2500 FL01-90

Post by cwfd336 »

Hello. I am having the same problem. I just got radio in. When I power on it shows FL 01/90 than goes to maintaince mode. I can still read radio with CPS. Any help would be great.

Thanks,

Rodney Campbell
User avatar
escomm
Queue Moderator
Posts: 5170
Joined: Fri Mar 24, 2006 8:24 pm

Re: xtl 2500 FL01-90

Post by escomm »

Have you tried a control sync with the CPS?
cwfd336
New User
Posts: 4
Joined: Sun Jan 04, 2009 10:50 am

Re: xtl 2500 FL01-90

Post by cwfd336 »

escomm wrote:Have you tried a control sync with the CPS?
no i have not i am not sure how to sync with the cps. when i put my programming cable in the head my cps wont do anything. to read radio i had to use the port on the radio its self not the head.
Bigfella237
Posts: 152
Joined: Wed May 02, 2012 11:30 am

Re: xtl 2500 FL01-90

Post by Bigfella237 »

When you plug the programming cable into the control head the display should change from "Remote Device" to "Local Device"?

Next you will need the control head sync file, this is simular to a firmware upgrade file, I think the latest one is around "Astro_25_CH_BF.cvn"?

Once you have that, open CPS, click on the "Tools" menu, then "Synchronize Control Head with Radio", then follow the on-screen instructions.

Good luck!

Andrew
cwfd336
New User
Posts: 4
Joined: Sun Jan 04, 2009 10:50 am

Re: xtl 2500 FL01-90

Post by cwfd336 »

thank you for your help. i dont have that file name. i will look to see what i can find.

thanks again
Bigfella237
Posts: 152
Joined: Wed May 02, 2012 11:30 am

Re: xtl 2500 FL01-90

Post by Bigfella237 »

Rodney,

PM sent...

Andrew
User avatar
Astro Spectra
Posts: 668
Joined: Sat Sep 22, 2001 4:00 pm

Re: xtl 2500 FL01-90

Post by Astro Spectra »

Good job Andrew
Bigfella237
Posts: 152
Joined: Wed May 02, 2012 11:30 am

Re: xtl 2500 FL01-90

Post by Bigfella237 »

Hey Rodney,

Did you get that link I sent you? It's still sitting there with zero downloads so I'm guessing not?

Let me know if you still need it?

Andrew
Post Reply

Return to “Radio Programming”