Spectra tac reciver replacement
Moderator: Queue Moderator
Spectra tac reciver replacement
I have went through the service manuals and think i figured out what i need to do to remove the micor receiver out and put a maxtrac 16 pin in, i just need to provide discriminator in and couple other things to the backplane and should be good to go and program the maxtrac for csq no pl and let the tac rx do the pl decode and audio control, etc etc etc, is there anyone who has done this? any notes you could give me or pointers etc etc let me know
Re: Spectra tac reciver replacement
Yes, I have done that and it works fine.
You will probably want to make a couple parts changes like a better squelch pot.
I sent you a PM.
You will probably want to make a couple parts changes like a better squelch pot.
I sent you a PM.
Steve K.
Re: Spectra tac reciver replacement
Talk to Greg Carttar.
He built a bunch of 4 channel units, using modified comparator chassis, with CDM's for receivers.
He built a bunch of 4 channel units, using modified comparator chassis, with CDM's for receivers.
-- Welcome My Son, Welcome To The Machine --
Bob Vaughan | techie@tantivy.net
AF6RR | P.O.Box 19792, Stanford, Ca 94309
-- I am Me, I am only Me, And no one else is Me, What could be simpler? --
Bob Vaughan | techie@tantivy.net
AF6RR | P.O.Box 19792, Stanford, Ca 94309
-- I am Me, I am only Me, And no one else is Me, What could be simpler? --