CPS options grayed out

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
medicnurse
Posts: 38
Joined: Wed Oct 20, 2004 8:45 pm
What radios do you own?: XTL5000;XTL2500,XTS5000,

CPS options grayed out

Post by medicnurse »

trying to change the TA function on a xts5000 but the direct frequency check box is grayed out. Any help would be appreciated
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Re: CPS options grayed out

Post by Will »

Check the radio wide settings.
Jim202
Posts: 3610
Joined: Sun Sep 09, 2001 4:00 pm

Re: CPS options grayed out

Post by Jim202 »

medicnurse wrote:trying to change the TA function on a xts5000 but the direct frequency check box is grayed out. Any help would be appreciated
Go to the Conventional and then VConventional again. Check box in middle of window for direct frequency.

Jim
medicnurse
Posts: 38
Joined: Wed Oct 20, 2004 8:45 pm
What radios do you own?: XTL5000;XTL2500,XTS5000,

Re: CPS options grayed out

Post by medicnurse »

Jim that is the Box that is grayed out and is unable to be checked.
ILuvXMRadio
Posts: 228
Joined: Tue Jun 21, 2005 1:50 am
What radios do you own?: Plenty

Re: CPS options grayed out

Post by ILuvXMRadio »

Are you sure its not a simplex 'direct' frequency to begin with? Unless the RX and TX are different that field will not be available if I recall correctly.
medicnurse
Posts: 38
Joined: Wed Oct 20, 2004 8:45 pm
What radios do you own?: XTL5000;XTL2500,XTS5000,

Re: CPS options grayed out

Post by medicnurse »

yes they are set up as a repeated channel no "direct" frequency
Post Reply

Return to “Radio Programming”