I upgraded my CPS from 16 to 19 today and added the nice feature of user switchable low power to my XTS2500.
all is sweet except in the Menu now, MUTE doesn't show up. Checkimg and re-checking with the CPS, the helpfile
says MUTE - is always shown. Not on my XTS anymore. its a 4meg set and the CPS rel notes dont mention any issues...
XTS2500 menu 'mute' missing !
Moderator: Queue Moderator
Re: XTS2500 menu 'mute' missing !
Same here. No Mute. Ive just updated to R19 as well.
Re: XTS2500 menu 'mute' missing !
Nevermind, mine works.
Re: XTS2500 menu 'mute' missing !
Something about enabling EXPERT Mode in the CPS.
-
Bigfella237
- Posts: 152
- Joined: Wed May 02, 2012 11:30 am
Re: XTS2500 menu 'mute' missing !
I didn't know ASTRO 25 CPS had different modes?Will wrote:Something about enabling EXPERT Mode in the CPS.
Andrew
Re: XTS2500 menu 'mute' missing !
No such thing in Astro25 CPS..Will wrote:Something about enabling EXPERT Mode in the CPS.
-Marc
Stupidity creates job security!
If your radio has old firmware, programming it with the latest CPS will not add any new features unless you have the latest firmware to match..
CPS = Customer Programming Software, Not CPS Software.
If your radio has old firmware, programming it with the latest CPS will not add any new features unless you have the latest firmware to match..
CPS = Customer Programming Software, Not CPS Software.
-
WarEagleEd
- New User
- Posts: 21
- Joined: Fri Aug 17, 2012 10:46 am
Re: XTS2500 menu 'mute' missing !
The issue is with MUTE not being a selectable option on the display of your XTS2500?
I have 19.01.00 installed and have MUTE as an option on my display. if you go into the CPS in tree view, expand the menu under the radio's serial number, then expand the menu under Radio Configuration, double click on Display & Menu, then click on the Menu Items tab. You should see a list of "available items" to add to the display and the option (by clicking arrow buttons) of moving them to and from the radio's display.
If you aren't seeing MUTE as an "available item" then I'm not sure what the problem would be.
Ed
I have 19.01.00 installed and have MUTE as an option on my display. if you go into the CPS in tree view, expand the menu under the radio's serial number, then expand the menu under Radio Configuration, double click on Display & Menu, then click on the Menu Items tab. You should see a list of "available items" to add to the display and the option (by clicking arrow buttons) of moving them to and from the radio's display.
If you aren't seeing MUTE as an "available item" then I'm not sure what the problem would be.
Ed
Re: XTS2500 menu 'mute' missing !
** bit late replying I'm afraid, (had serious personal probs) **
Thanks for the replies folks, Ed, I am using 19.01.00 also, so i re-enabled the 'MUTE' in the CPS later - and found i had reached my max number of items allowed in the menu, that seemed to have been the problem, so it is all as expected now, i enabled 'Low power too - which was my original
reason for upgrading the CPS. excellent.
Thanks everyone, Thanks Ed
Mark
Thanks for the replies folks, Ed, I am using 19.01.00 also, so i re-enabled the 'MUTE' in the CPS later - and found i had reached my max number of items allowed in the menu, that seemed to have been the problem, so it is all as expected now, i enabled 'Low power too - which was my original
reason for upgrading the CPS. excellent.
Thanks everyone, Thanks Ed
Mark
-
WarEagleEd
- New User
- Posts: 21
- Joined: Fri Aug 17, 2012 10:46 am
Re: XTS2500 menu 'mute' missing !
I wondered if you had solved the problem.
My users have never had a high demand for menu items so I didn't realize that you could allow too many items on the menu. This is good to know. What is the max number of items allowed?
Ed
My users have never had a high demand for menu items so I didn't realize that you could allow too many items on the menu. This is good to know. What is the max number of items allowed?
Ed