So I obtained an older Motorola CommandPlus console from an auction for about $50. It works great, however the software package I purchased from GAI-Tronics (Moto no longer supports i suppose) does not support the older firmware. Currently installed is "CPK1F HOST3H MAST2G". I called GAI-Tronics and after talking to several people, they were not able to help find a solution. Hoping someone here might be able to point me in the right direction, or am I SOL?
-Thanks!
CommandPlus Console Old Firmware
Moderator: Queue Moderator
Re: CommandPlus Console Old Firmware
My understanding is you have to purchase new firmware to bring it up to date. It's about $660 last I inquired about this. I've also heard that CARDS is supposed to just work even with the really old consoles.Two Tone wrote:So I obtained an older Motorola CommandPlus console from an auction for about $50. It works great, however the software package I purchased from GAI-Tronics (Moto no longer supports i suppose) does not support the older firmware. Currently installed is "CPK1F HOST3H MAST2G". I called GAI-Tronics and after talking to several people, they were not able to help find a solution. Hoping someone here might be able to point me in the right direction, or am I SOL?
-Thanks!
Alex
The Radio Information Board: http://www.radioinfoboard.com
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
-
firedog359
- Posts: 53
- Joined: Sun Feb 24, 2013 2:24 pm
- What radios do you own?: MA/COM KMC-300,ICOM F50V
Re: CommandPlus Console Old Firmware
Hi,found this thread looking for some commandplus stuff.Do you still need the original Moto software?