HT1000 Converta-com Part#'s

[Stage 2]

What are the correct part numbers for the HT1000 VHF and UHF amplifiers used with the Converta-com. I have an NTN1322. Thanks in advance.

[N4KVE]

The amplifiers share the case with the control unit. The NTN1322 is a control unit w/o the amp. The control unit/VHF amp combo is NTN1323, & the control unit/UHF combo is NTN1324. GARY

[fineshot1]

Here is everything I have and some of this is on other threads which i got from this website
or Motorola Docs.

Motorola MTVA Model/Part Numbers

NTN1340C MTVA - MTSX holder unit - Non Band specific/No Amp

NTN1322B = Non band specific Controller Unit(No RFPA)

NTN1323A = Model: N1671A Option:H34AA Controller/RFPA VHF-Hi

NTN1324B = Model: N1671B Option:Q149AA Controller/RFPA UHF

NTN1325B = Model: N1671B Option:Q150AA Controller/RFPA 800Mhz

NTN1326A = Model: N1671B Option:Q151AA Controller/RFPA 900Mhz
FCC ID: AZ489FT5764

External amplified speaker assembly HSN1006A

Microphone is a HMN1035C or HMN1056D.
--------------------------------------------------------

kit N1671A, consisting of NTN1340A holder, plus control unit [one of: NTN1322A

(universal w/o RFPA), NTN1323A (w/ VHF RFPA), NTN1324A (w/ UHF RFPA), NTN1325A

(w/ 800 RFPA), or NTN1326A (w/ 900 RFPA)], and interface cable NKN6453A (8ft) or

NKN6454A (16ft), and optional amplified speaker HSN1000B or HSN1006B. Microphone

is a HMN1035C or HMN1056D.

--------------------------------------------------------

From the MTVA manual.

Q149AA is the UHF PA option.
NTN1324A is the control unit w/UHF PA 25W

N1671B is the baisc MTVA.


other options:
H24AA - trunk mount cable set (w/o RFPA)
H25AA - trunk mount cable set (w/ RFPA)
Q147AA - 6watt PA/Speaker option
Q148AA - data mode option
H34AA - RFPA VHF 25W
Q149AA - RFPA UHF 25W
Q150AA - RFPA 800 15W
Q151AA - RFPA 900 12W
Q757AA - mic, palm

The RFPA power levels are drive level dependant,
(ie: 2.0w in for 25w out on vhf/uhf).
Per the manual, low power should be used when using a RFPA.
Proper drive levels are 2.0w for vhf/uhf, 3.2w for 800, and 2.9w for 900.
This is on page 4 of 68P81075C90-A MTVA Installation Instructions manual.


kit parts:
NTN1340A - holder
HMN1035C - mic, palm
HMN1056D - mic, mini
NTN7448A - mounting hardware, holder (tiltable)
SLN5216A - flex stalk mount, holder
NTN1322A - control unit
NTN1323A - control unit w/ VHF RFPA
NTN1324A - control unit w/ UHF RFPA
NTN1325A - control unit w/ 800 RFPA
NTN1326A - control unit w/ 900 RFPA
NTN7358A - mounting hardware, control unit
NKN6453A - interface cable, 8ft
NKN6457A - data option cable
NKN6456A - supply cable - 10ft
HKN4137A - supply cable, RFPA - 10ft
HKN6094A - supply cable - 20ft
HKN4192B - supply cable, RFPA - 20ft
NKN6451A - RF coax cable - 8ft
NKN6454A - interface cable - 16ft
NKN6452A - RF coax cable - 16ft
HSN1000B - 6 watt PA/speaker
NKN6455A - 6 watt PA/speaker cable

RF coax is used between the holder and the control unit when equipped
with the RFPA option. data cable is used with the data option only.
trunk mount option adds 16/20ft cables.