XTS5000 in constant monitor

[FF/EMT/KC2NFB]

I have a XTS5000 that is in constant monitor. I have the speaker icon on the display on all channels that are programmed with PL/DPL. The only thing I can think of is that I'm missing some global setting somewhere.

Has anyone seen this or have an idea what I'm missing?

Thanks

[Will]

PL Disable is on. Maybe on the B position of the A B C switch.

[jackhackett]

Take a look at this thread, last comment:

http://batboard.batlabs.com/viewtopic.php?f=1&t=93720

Was it cloned?

I vaguely remember hearing about portables that got stuck in monitor for no apparent reason, but it's been quite a while, so maybe there was a firmware issue that's been fixed? Do you know what firmware version you have?

[GlennD]

The XTS5000's that Long Beach PD used would sometimes stick in monitor. We had no manual monitor controls available. The fix was to reprogram the radio with a good code plug. Since we had dedicated channels the usual complaint was the user heard the repeater ID and had squelch tails.

[FF/EMT/KC2NFB]

Sorry for the delayed reply. Been really biz with clearing snow and biz with work.

The radio was not cloned.

I will look into "PL Disable is on. Maybe on the B position of the A B C switch"

Firmware im sure is quite old. I don't have the radio with me right now. Im thinking 06.xx.xx best I can remember.

Thanks for the help

[jmr061]

Sorry for the delayed reply. Been really biz with clearing snow and biz with work.

The radio was not cloned.

I will look into "PL Disable is on. Maybe on the B position of the A B C switch"

Firmware im sure is quite old. I don't have the radio with me right now. Im thinking 06.xx.xx best I can remember.

Thanks for the help

I do remote legit firmware upgrades for $25. You should get it upgraded if it really is that old of firmware.