Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Anyone useing a XPR 5550 w/ the hand held control head

Moderator: Queue Moderator

WA6PMW
New User
Posts: 12
Joined: Sat Mar 09, 2013 9:35 am

Anyone useing a XPR 5550 w/ the hand held control head

Postby WA6PMW » Wed Dec 20, 2017 3:00 pm

I am thinking of adding a hand held control head to my XPR5550 when I install it in my Ford F350.
Can anyone that has one tell me how the audio level and quality from the speaker is in the hand held control head ?
Is it worth the money?
Also does it really control everything so I wont need access to the radio at all?

Bill-WA6PMW

sjxts3000
Posts: 810
Joined: Sat Jul 09, 2011 8:14 pm
What radios do you own?: APX

Re: Anyone useing a XPR 5550 w/ the hand held control head

Postby sjxts3000 » Wed Dec 20, 2017 6:17 pm

Yup...just installed this last week in my truck (2012 F250).... XPR5550e with HHCH

Pics here:
viewtopic.php?f=8&t=114720

The audio from the HHCH is plenty loud. I'm rather impressed. If you look at the BSM for the HHCH, page 5-12 shows a pretty substantial speaker inside the housing. From the extermal housing, there's no "speaker grill" except for the area in between the volume up/down buttons. It's very small for a "grille" but the speaker packs a good punch. The speaker looks to be about the same size as that in a normal XPR portable.

The HHCH controls everything. It has plenty of buttons. 4 programmable buttons for both short and long press each, three side buttons with both short and long press each themselves as well, and then there's the normal TRBO menu items. It's almost "too much" and I often forget what I programmed each button for!
The only thing you'll need to access the control unit for is the USB-B connector for programming. Any off-the shelf USB-A to USB-B cable will work (i.e. the kind you get with a printer). So leave yourself some room to hook into it for programming. You can also program over Wi-Fi, I believe, but I never use that as the signal in the driveway is often weak and I don't trust it.

N4KVE
Posts: 1592
Joined: Wed Apr 02, 2003 10:35 am
What radios do you own?: XTS3000/5000, TRBO, 900MHZ

Re: Anyone useing a XPR 5550 w/ the hand held control head

Postby N4KVE » Wed Dec 20, 2017 6:40 pm

When I listen to the locals transmitting with them, they do not sound as good as they did when they used the original mike, & display that was mounted to the radio. It's not terrible, but not as good as the original configuration. GARY.

sjxts3000
Posts: 810
Joined: Sat Jul 09, 2011 8:14 pm
What radios do you own?: APX

Re: Anyone useing a XPR 5550 w/ the hand held control head

Postby sjxts3000 » Wed Dec 20, 2017 6:49 pm

N4KVE wrote:When I listen to the locals transmitting with them, they do not sound as good as they did when they used the original mike, & display that was mounted to the radio. It's not terrible, but not as good as the original configuration. GARY.


Once I got my radio operational in the truck, that's the first thing I tested... asked several people to give me feedback (no pun intended) on the audio quality. I asked over both analog and DMR. I have the 40W version of the radio. Everyone indicated the audio was just fine.

There can also be other factors at play such as radio firmware, microphone ACG, and/or other CPS settings. FWIW, I have both analog and digital mic AGC disabled and the rest of the audio profile is bone stock (basic noise suppression, no trill enhancement, no AF suppressor, etc).

N4KVE
Posts: 1592
Joined: Wed Apr 02, 2003 10:35 am
What radios do you own?: XTS3000/5000, TRBO, 900MHZ

Re: Anyone useing a XPR 5550 w/ the hand held control head

Postby N4KVE » Wed Dec 20, 2017 7:02 pm

The guys here all have the newest FW, & AGC on. Like I said, not terrible, but noticeable.


Return to “MotoTRBO Portables and Mobiles (3xxx/5xxx/7xxx/SL) 2.0 Series Subscribers”

Who is online

Users browsing this forum: No registered users and 19 guests