OK.. Im drawing a blank and I can't find my notes.. I know the ignition sense is pin #10...
What is the external speaker?? 1 and 16...
CDM 1250 Accessory Pinout ??
Moderator: Queue Moderator
- FFParamedic571
- Banned
- Posts: 467
- Joined: Tue Aug 27, 2002 7:57 pm
- FFParamedic571
- Banned
- Posts: 467
- Joined: Tue Aug 27, 2002 7:57 pm
Motorola numbered the connector like that to keep the central 16 pins the same as the rest of their 16 pin accessory plugs. The added outer pins on the CDMs are used for flashing firmware, etc.
For standard accessory connections, you can use a regular 16 pin connector, and just ignore pins 17-20 (just be careful about bending them when inserting the plug )
The pinouts and diagrams are all available on the main Batlabs site, although I seem to be unable to reach it at the moment.
For standard accessory connections, you can use a regular 16 pin connector, and just ignore pins 17-20 (just be careful about bending them when inserting the plug )
The pinouts and diagrams are all available on the main Batlabs site, although I seem to be unable to reach it at the moment.