Spectra speaker plug

[John]

Does anyone know a source for the connector used on Spectra speakers? I am looking for both the mating connector to plug into a Spectra external speaker and the actual speaker plug itself. This is the same connector used on the Spectra ignition sense leads. I need about 6 of each.

Thanks,

John

[jackhackett]

if you mean the white 2 pin connector, you can get them from Mouser (http://www.mouser.com)

male shell: 571-14803190
female shell: 571-14803180
male pin: 571-606181
female pin: 571-606171

[fail999]

As I recall these are off the shelf Molex parts.

Radio Side: Body 1-480319-0
Pin 60620-1

Spk Side: Body 1-480318-0
Pin 60619-1

[jackhackett]

Tyco/Amp mate-n-lok

I suppose molex may make them too, but I don't see any molex part numbers that look similar.
Anyway, the source I mentioned is good.. no minimum order, good service.

[John]

Thanks for the replies..... I have them on order through Mouser.

John