Batboard

I'm doing the repeater thing with two M100 Radius 5pin radios. In one pic it shows Q552 as one transistor and in the (after pic) it shows another transistor as Q552. Just wanted to be sure. Is it the one closer to the front or the one back and to the left?
Thanks,
Bob Grimsley


<font size=-1>[ This Message was edited by: KG4BAK on 2001-11-12 13:41 ]</font>

On most logic boards, it is closer to the front of the board near the connector pins for the two connectors going to the "head".
Check here in the archives, as it was fully discussed earlier.
I am working on a kit that will include a drawing, not completed yet.