LA County Fire Channel Spacing

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
SoCalRescue
Posts: 449
Joined: Wed Sep 01, 2010 8:28 pm

LA County Fire Channel Spacing

Post by SoCalRescue »

Hey All,

Just wondering if anyone knew what I should be setting my CDM1250 channel spacing to for monitor only for LACo Fire. Anyone have first hand experience?


Thanks!
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Re: LA County Fire Channel Spacing

Post by Will »

25 to 30 kHz spacing and 5 kHz deviation. That is the old "wideband" settings..........
User avatar
SoCalRescue
Posts: 449
Joined: Wed Sep 01, 2010 8:28 pm

Re: LA County Fire Channel Spacing

Post by SoCalRescue »

In cps under the personality, I would then set the channel spacing to 25. Where would I change the deviation? Do I need to play with the deviation?
User avatar
N6LAU
Posts: 382
Joined: Mon Apr 14, 2008 12:42 am
What radios do you own?: Talkabout-250 w/ P25 Phase 2

Re: LA County Fire Channel Spacing

Post by N6LAU »

The appropriate dev level follows the channel spacing setting. No extra change is needed.
Joe - N6LAU
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”