Linking repeaters

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
lancerice
Posts: 69
Joined: Sat Jan 16, 2010 10:43 am
What radios do you own?: GM300's, GM350's, Visar's

Linking repeaters

Post by lancerice »

Hi all, I have two repeater stations which are located about 30 miles apart, each repeater is 2 Gm300 vhf radios linked ogether with 2 antennas up a 60ft mast, they both work very well, but how can I lik the 2 together so if I am near one with my handheld the other handhelds closer to the other repeater can hear me and talk back, I think it is called Linked Repeater, but I am not sure how this is done.
Can any one help me please
thanks lance
User avatar
Bill_G
Posts: 3087
Joined: Thu Sep 17, 2009 5:00 am

Re: Linking repeaters

Post by Bill_G »

You could crossband, wifi, or an internet tunnel.
lancerice
Posts: 69
Joined: Sat Jan 16, 2010 10:43 am
What radios do you own?: GM300's, GM350's, Visar's

Re: Linking repeaters

Post by lancerice »

I would prefer to use normal gm300 vhf radios if poss, I have an idea of 2 working repeaters which would be 4 radios 2 at each repeater working as a normal repeaters, I would then use another 2 radios one at each repeater but tuned to work with each other, but I would need to connect the 3rd radio on each repeater to tx the repeater when rxing a signal from its brother radio on the other repeater, and for the rx side of the repeaters to tx both the tx side of the repeater and the 3rd radio, I am quessing this would work
thaks lance
User avatar
wavetar
Administrator
Posts: 7341
Joined: Sun Sep 09, 2001 4:00 pm

Re: Linking repeaters

Post by wavetar »

lancerice wrote:I would prefer to use normal gm300 vhf radios if poss, I have an idea of 2 working repeaters which would be 4 radios 2 at each repeater working as a normal repeaters, I would then use another 2 radios one at each repeater but tuned to work with each other, but I would need to connect the 3rd radio on each repeater to tx the repeater when rxing a signal from its brother radio on the other repeater, and for the rx side of the repeaters to tx both the tx side of the repeater and the 3rd radio, I am quessing this would work
thaks lance
Yes, your concept is correct. We installed a similar setup a number of years ago to link two GR1225 repeater sites, using VHF CDM750 radios for the link. COR from the local GR1225's keyed the link radios, and COR from the link radios keyed the remote repeater.
However, 30 miles is a long way to go with only 60-foot masts to work with, depending on the terrain in between. High gain Yagi antennas will give you the best chance, if the mast can accommodate them.
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.

Welcome to the /\/\achine.
User avatar
Bill_G
Posts: 3087
Joined: Thu Sep 17, 2009 5:00 am

Re: Linking repeaters

Post by Bill_G »

Are the two repeaters on different freqs, but in locations they can hear each other well?
lancerice
Posts: 69
Joined: Sat Jan 16, 2010 10:43 am
What radios do you own?: GM300's, GM350's, Visar's

Re: Linking repeaters

Post by lancerice »

both repeaters are on the same freq so you can use the same channel at both sites
User avatar
Bill_G
Posts: 3087
Joined: Thu Sep 17, 2009 5:00 am

Re: Linking repeaters

Post by Bill_G »

Then you will definitely need a third radio pair to act as a simplex link between sites. Just be aware that any overlap zone between the two sites will be clobbered and unusable. Post the lat and long of the two sites, and I'll post a predicted coverage plot. I'll need ant elevation, gain, xmit pwr, and rcvr sense too.
CircleBat
Posts: 171
Joined: Mon Oct 08, 2007 3:11 pm

Re: Linking repeaters

Post by CircleBat »

just put the repeater output on the same tone and the input with 2 different tones so that you don't get the overlap

CircleBat
lancerice
Posts: 69
Joined: Sat Jan 16, 2010 10:43 am
What radios do you own?: GM300's, GM350's, Visar's

Re: Linking repeaters

Post by lancerice »

Site 1, 51.526475, 0.539017, Ant Height 40ft, not sure of gain the antennas are 1/4 wave
site 2, 51.200215, 0.386925, Ant HEight 60ft, not sure of gain the antennas are 1/4 wave
Thanks Lance
User avatar
Bill_G
Posts: 3087
Joined: Thu Sep 17, 2009 5:00 am

Re: Linking repeaters

Post by Bill_G »

I'll have interference maps for you this evening based on the following assumptions -

25w xmit pwr to ant
-116db rcvr sense
0db gain
User avatar
Bill_G
Posts: 3087
Joined: Thu Sep 17, 2009 5:00 am

Re: Linking repeaters

Post by Bill_G »

lancerice wrote:Site 1, 51.526475, 0.539017, Ant Height 40ft, not sure of gain the antennas are 1/4 wave
site 2, 51.200215, 0.386925, Ant HEight 60ft, not sure of gain the antennas are 1/4 wave
Thanks Lance
Lance - Please verify the coordinates for site 1. I show it on the shore with a land elevation of 1 meter.
lancerice
Posts: 69
Joined: Sat Jan 16, 2010 10:43 am
What radios do you own?: GM300's, GM350's, Visar's

Re: Linking repeaters

Post by lancerice »

site 1 is on an island of which most is below sea level, canvey island, essex, UK
User avatar
Bill_G
Posts: 3087
Joined: Thu Sep 17, 2009 5:00 am

Re: Linking repeaters

Post by Bill_G »

As promised - an interference map of your proposed linked repeaters. If you can achieve the link, you may actually have a poor man's simulcast by accident of the terrain. There are two very neat puddles bisected by the range of hills. I apologize for the color choices, but they make excellent contrast. Green in the north site coverage, and hot pink is the south site coverage. A mobile in those areas should have exclusive use of just the one repeater with little interference from the other. The black areas are where they are within 5db of each other, and are sure to cause beating in the mobile receiver. This is an optimistic map. This is the least worst it can be based on the assumptions I gave earlier.

Cheers.

Image
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”