MC2100 help

[Vincenzo]

Hello everyone,
I have a Motorola MC2100 (model numeber: M01KHN9AN8AN), and while programming, has shut down (because of a short blackout) and later, my MC2100 is not turned on.
How can I fix this?
What has happened?
Waiting for your help, thank you in advance.

Vincenzo

[Andreas]

Try to program it again!
If you can´t program it,you can fix it with the 2100 series lab upgradetool.
For this,you need a modified RIB or Unirib.

What shows the display on the corrupted radio?

Andreas

[Vincenzo]

Thank you for having responded to me.
I've tried again to reprogram, but nothing happened.
The display shows nothing and it seems that the radio is dead.
I try to make a upgrade tool as you suggested.
I'll let you know. Thanks very much for your help.

Vincenzo

[bup3]

Hi,

You have to open radio and check flashrom reference, only 29C020 can be flashed with Andréas method, those with 28F020 use different voltage...

[Vincenzo]

Good morning,
Now I get this message in the display: FILE 01/90
How can I fix it?
Thanks in advance.

Vincenzo

[Andreas]

Create a new codeplug with the 2100 series DOS RSS and dump it in with MTSX-Lab or a native codeplug programmer.
Still problems?
Flash the radio again,convert the codeplug with MTSX-Lab or a native codeplug programmer into a s-record and use the 2100 series lab upgradetool,to program the s-record into your radio.
Program the internal and external codeplug.

Andreas

[Vincenzo]

Ok Andreas, I try to do all this. I hope.
I'll let you know if everything went well.
Thanks, see you soon.

Vincenzo