Page 1 of 1
MC2000 remotes
Posted: Mon Feb 27, 2012 8:38 am
by Lake Effect
The setup is this: Two MC2000 tone control remotes with channel steering hooked up to a CM300 through a remote adapter. All works well for tx/rx/steering. Is there a setting in RSS or a modification to make the remotes follow channel changes. That is, if remote "A" changes the channel, can remote "B" be made to indicate the change? I'M thinking no but there may be something I missed.
L.E.
Re: MC2000 remotes
Posted: Tue Feb 28, 2012 9:00 am
by Lake Effect
Disregard. Got it.
L.E.
Re: MC2000 remotes
Posted: Tue Feb 28, 2012 3:13 pm
by maxkelley_kc2spy
Care to post what it was, for future reference of others?
Re: MC2000 remotes
Posted: Wed Feb 29, 2012 5:21 am
by Lake Effect
Nothing to post other than I was taking the customer's word that it did not track the other remote. Yesterday I made the trip to his location to try different things I had come up with and found it worked just fine. No changes needed. It seems to be built into the MC2000 standard operation.
L.E.