Batboard

I have the PDF file of the exploded view of a Model 3 Control Head for an MCS2000 but unfortunately it doesn't list the actual part numbers, just the numbers that correspond to the diagram. The Model 3 Control Head part numbers I need match up to these numbers on the diagram:

1 (the piece that has the locking tabs for the control head)
2 (the control head gasket)
11 (the piece behind number 1)

Can anyone please help fill me in on the actual PNs for these? Or if you have a copy of the service manual in PDF and would be willing to share that would be great too as I think it might contain the diagrams along with the actual part numbers. If you can help in this way my email is [email protected] .

Any help would be appreciated. Thanks.

Joe

1: 1502455Y05, Housing, Black
2: 3202462Y03, Gasket, Housing
11: 0704779P01, Retention Frame

I would share the whole exploded view diagram, but our scanner is a POS!

N6LAU wrote:I have the PDF file of the exploded view of a Model 3 Control Head for an MCS2000 but unfortunately it doesn't list the actual part numbers, just the numbers that correspond to the diagram. The Model 3 Control Head part numbers I need match up to these numbers on the diagram:

1 (the piece that has the locking tabs for the control head)
2 (the control head gasket)
11 (the piece behind number 1)

Can anyone please help fill me in on the actual PNs for these? Or if you have a copy of the service manual in PDF and would be willing to share that would be great too as I think it might contain the diagrams along with the actual part numbers. If you can help in this way my email is [email protected] .

Any help would be appreciated. Thanks.

Joe

Check your PM for information.

Jim

Thanks all, got it!

Joe

Oh, also does anyone know if a part exist to plug into the 25-pin accessory connector on a Model 1 to enable the control head speaker and take care of the emergency jumper? If so can you provide the part number? Thanks again.

Joe

Disregard, I found it. HLN6412.