Batboard

ok gang I have found everything on here about these units except what I am looking for and I need some direction.

got the basics down, power to the controller, red yellow and black from the conroller end of the cable wire to their respective needs and fuses, speaker cable connected in the appropriate spaces, but there is still no power to the cradle. there is a two wire molex type connecter coming out of the controller end of the cable that has me stumped it has a green and a red wire and I cannot find reference to these two wires anywhere. Does anyone have a diagram for the installation of this. Ive seen the pinouts but that doesn't really help me. Help help help...very frustrated.

[email protected]

First you may want to tell us exactly what you have by way of motorola part numbers
which will identify to us what they are. Please list the part numbers to all you have
including speaker and mic.

The cradle or holder unit as its called gets power from the control unit via the 25 pin
cable between them.