Batboard

I just programmed several NEW CM300 using 5.12 software. Only on channel 1 am having the problem of recieve audio with a 2-3 second delay causing me to miss the beginning of the transmissions.

Channel 1 and 2 are the same RX Freq and CSQ, I do have MDC setup the same to display ID's on recieve. I am thinking some default setting I am missing when it comes from factory to have that delay on channel 1 and I cant find it.

Sounds like MDC muting delay needs to be reduced.

Thats what I was thinking but I can not find it in the software any thoughts ?

I found it, had to expand to the expert view and the dos mute options were in there. Thanks for your help

Look for a setting in RX area dealing with RX timing for unsquelching.
Intended toreduce noises when in RX mode to eliminae crackles and noises generated when the radio switches from TX to RX...