Page 1 of 1
Interfacing an XTVA to a Tone Term Panel
Posted: Thu Jun 28, 2012 8:07 am
by W1HVN
Anyone have the service manual for an XTVA or know where to tap the proper TX/RX audio and PTT to adapt to a Tone Term Panel? My initial guess is your usual RJ Mic Jack (Mic and PTT) and the line level audio molex connector (Receive Audio) going to the amplified speaker? However, i'm wishing to use the HHCH in conjuction with the TRP as well as local speaker. Are these contacts present on the 25 pin connector?
Thanks
Re: Interfacing an XTVA to a Tone Term Panel
Posted: Thu Jun 28, 2012 10:51 am
by Jim202
W1HVN wrote:Anyone have the service manual for an XTVA or know where to tap the proper TX/RX audio and PTT to adapt to a Tone Term Panel? My initial guess is your usual RJ Mic Jack (Mic and PTT) and the line level audio molex connector (Receive Audio) going to the amplified speaker? However, i'm wishing to use the HHCH in conjuction with the TRP as well as local speaker. Are these contacts present on the 25 pin connector?
Thanks
Contact me .
Jim
Re: Interfacing an XTVA to a Tone Term Panel
Posted: Mon Jul 02, 2012 10:16 am
by motorola_otaku
EDIT: never mind, misread XTVA as AVA. Disregard.