apx housing change
Posted: Wed Jul 18, 2012 12:23 pm
How do you change out the housing ? By removing the inner screws ?
1. remove battery
2. remove screws in middle of case holding speaker to case
3. remove speaker cover
4. remove screws at top (open space at left top is for bluetooth module)
5. slowly wiggle the case so it comes away from the chassis. I can't remember
if the screws all the way at the bottom need to come out.
The above is based on my replacement of the half case which changes the color of
the side panels on a 7000, but it should be enough to get you started if you have to
replace the entire case.