Page 1 of 1
PM1500 MIc Connector Help
Posted: Thu Jul 19, 2012 2:09 pm
by latinosusa
Hi Everyone.
I Have a pm1500 radio witch i am going to use as a receiver only, but when i remove the mic it goes into squelch audio.
can any one tell me witch pins in the mic connector i am suppose to ground in order to mute the squelch?
Thanks for all your help.
God bless you.
Jose.
Re: PM1500 MIc Connector Help
Posted: Thu Jul 19, 2012 9:49 pm
by escomm
This can be fixed with the CPS. Uncheck the box for HUB disables PL.
Re: PM1500 MIc Connector Help
Posted: Mon Jul 30, 2012 6:11 am
by latinosusa
Thanks Escomm, it worked .
Thanksd.
Re: PM1500 MIc Connector Help
Posted: Mon Jul 30, 2012 12:04 pm
by HLA
why wouldn't you just disable the ptt line? if you remove the mic the ptt is still enabled and it can still tx?
Re: PM1500 MIc Connector Help
Posted: Mon Jul 30, 2012 8:53 pm
by Will
HLA wrote:why wouldn't you just disable the ptt line? if you remove the mic the ptt is still enabled and it can still tx?
???? It IS a receive only radio, so the PTT is not active. And it seems that the OP said there is no mic with it.
Re: PM1500 MIc Connector Help
Posted: Tue Jul 31, 2012 6:32 pm
by HLA
maybe I read it wrong, sounded more like he was using a speaker mic and wanted to know what to do to disable the mic in it?