Page 1 of 1
IPE2500A
Posted: Wed Aug 22, 2012 8:34 am
by Dave518
Does anyone know the pin-outs for the Gai-Tronics XAC0004A programming cable? I thought it was the same as for the MRTI2000 but the cable I have that works with the MRTI2000 does not work with the IPE2500A. Thanks.
Re: IPE2500A
Posted: Wed Aug 22, 2012 4:07 pm
by RFguy
DB9 RJ45
2-------7
3-------2
5-------5
Good luck
Re: IPE2500A
Posted: Thu Aug 30, 2012 11:04 am
by Dave518
Just a follow up... since the thread has 62 views. I had the right cable all along. Gai-Tronics shipped an IPE2500A with the C200 firmware so it would only read with the C200 software. They've sent the correct firmware and I can now read / write to it with Card Suite with no problems.
Those are the correct pin-outs. Thanks.