Page 1 of 1
New CPS & F/W for XPR6550, & XPR4550
Posted: Tue Sep 18, 2012 11:42 am
by N4KVE
I have a XPR6550, & XPR4550 both with F/W 1.09.00. They program with CPS 7.6. I understand there is new F/W 1.09.10 [& possibly even newer] & new CPS 8.0. If I buy a new radio, & it comes with F/W 1.09.10 will I have to use the newest CPS, or would the CPS 7.6 work with the newest F/W? GARY
Re: New CPS & F/W for XPR6550, & XPR4550
Posted: Tue Sep 18, 2012 12:00 pm
by Bigfella237
I would think a brand new radio would come from Motorola written with the current (i.e. V8.0) CPS, meaning you would need the same to read/write regardless of the firmware version, unless you purchased one that's been sitting on a dealer's shelf for a while that is?
Andrew
Re: New CPS & F/W for XPR6550, & XPR4550
Posted: Tue Sep 18, 2012 1:21 pm
by N4KVE
Let me rephrase my question. If I have my radios upgraded from 1.09.00 to 1.09.10 could I still use my CPS 7.6? GARY
Re: New CPS & F/W for XPR6550, & XPR4550
Posted: Tue Sep 18, 2012 6:56 pm
by TreyH
7.6 will work with 1.09.10 - no worries.
Re: New CPS & F/W for XPR6550, & XPR4550
Posted: Wed Sep 19, 2012 9:43 am
by Forts
Yes, 7.6 & 1.09.10 will play together just fine.