Page 1 of 1
xpr8400 both slots transmitting
Posted: Sun Nov 04, 2012 12:23 am
by KitN1MCC
is it normal when one slot is being used that both tx A and B are light
Re: xpr8400 both slots transmitting
Posted: Sun Nov 04, 2012 6:37 am
by Tom in D.C.
If you're in simplex I think that TRBO runs at 12.5 kHz in that mode.
Re: xpr8400 both slots transmitting
Posted: Sun Nov 04, 2012 2:59 pm
by wavetar
KitN1MCC wrote:is it normal when one slot is being used that both tx A and B are light
Yes, both slots are always lit in repeater operation.
Re: xpr8400 both slots transmitting
Posted: Sun Nov 11, 2012 2:59 pm
by KI4M
The subscriber units are the ones that pulse on/off. The repeater transmits continuously if there is a signal on Slot A or Slot B. That is the beauty of the repeater in that you can use a Class C amplifier.
Shane KI4M