Batboard

Good day all,

I've got a (probably easy ) issue here. I have a Midland earpiece here with the two prong connector. I have the BDN6676D Audio Adaptor. I tried to plug the 3.5mm part ( the longer plug ) into the port, and all I would get is a constant tone on my MTS2000, and a blinking red ( busy ) light. What adaptor will I need for this to fit the adaptor ? Or am I basically out of luck ?




Uploaded with ImageShack.us

There are a bunch of aftermarket Jedi 2 pin audio adapters on a popular auction site, that would work with your earpiece.


-Marc

Ah, thanks for pointing that out. I didn't even know those existed !

Upon looking at the audio adaptors, it seems that the two prongs are too tight to work ( I tried to plug it into my Sp50, and the two holes were slightly wider on the earpiece and wouldn't fit into the radio. I think I'd run into the same issue with that audio adaptor, since the holes look around the same space apart as the one on my Sp50.

I got some threaded male 3 circuit 3.5mm plugs that fit the Jedi adapter from Twitco in NH. And change out the dual pin connector.