Batboard

Posted: **Fri Feb 01, 2013 4:17 am**

I'm setting up a small repeater using two CM360 mobiles, using one of those cheap ebay cables to connect the radios.

The setup does "work", but there is an issue. The TX radio transmits audio from the RX, but is only TX'ing when audio is received and not on receipt of the carrier.

If I stop talking for example whilst holding the PTT, the TX drops.

I assume I need to change some pins on the radio. Can anyone help?

Posted: **Sun Feb 03, 2013 11:43 am**

Also noticed that the radio will only pass audio when VOX is ticked in the personality.

Posted: **Sun Feb 03, 2013 11:45 am**

What are pin assignments on the TX and RX radio?

Posted: **Sun Feb 03, 2013 12:03 pm**

The only ones I can change are #3,4,8,9,12,14.

Of those all are set to disabled apart from.

RX Radio - Pin 8 : Car Audio Mute
TX Radio - Pin 8 : Voice PTT

Batboard

CM360 as repeater - pin problem?

CM360 as repeater - pin problem?

Re: CM360 as repeater - pin problem?

Re: CM360 as repeater - pin problem?

Re: CM360 as repeater - pin problem?