Page 1 of 1
Convert MTS2000 secure module to MCS2000
Posted: Sun Feb 03, 2013 2:00 am
by BRAVO0122
Hello
is it possible convert MTS2000 secure module for MCS2000?
Re: Convert MTS2000 secure module to MCS2000
Posted: Sun Feb 03, 2013 9:10 am
by spectragod
No conversion necessary, it plugs right in.
Re: Convert MTS2000 secure module to MCS2000
Posted: Mon Feb 04, 2013 1:11 am
by BRAVO0122
But it can't hold secure key after power supply off.
Maybe it need a battery to hold key.
Re: Convert MTS2000 secure module to MCS2000
Posted: Mon Feb 04, 2013 5:18 am
by spectragod
There is a cover that goes in place over the top, is it there? If not, you will have to bypass the popple on top of the board. Also, in the RSS or CPS, you can check "infinite key retention" and that should help with your dilemma as well.
Re: Convert MTS2000 secure module to MCS2000
Posted: Mon Feb 04, 2013 7:30 am
by BRAVO0122
Yes I bypassed the popple,and MCS/MTS series radio CPS do not have "infinite key retention"
Re: Convert MTS2000 secure module to MCS2000
Posted: Mon Feb 04, 2013 6:28 pm
by spectragod
BRAVO0122 wrote:But it can't hold secure key after power supply off.
Maybe it need a battery to hold key.
There were some that had an extended key retention, they had a capacitor on the board. What type of crypto are you using?
Re: Convert MTS2000 secure module to MCS2000
Posted: Mon Feb 04, 2013 7:49 pm
by BRAVO0122
NTN7280