Batboard

'Afternoon...
I'm looking to replace a couple of radios in Ham service... they are Maxtrac/Radius series units and we used the expanded accessory connector when we set them up to do those Hammy things.
Today, I just don't know what models still have such a connector.
My needs are:
VHF 144-148 MHz, 5 kHz (wideband), 25 watts or less (10 watts continuous is fine), expanded accy connector fully programmable (like the old GM300).
Any advice would be really appreciated!
Thanks,
Sam

CDM Series
M1225
SM50
CM200, CM300, PM400

I should have said, what is available in current production (ie: new).
M1225 and SM50 are long gone I think.
CDM may be to pricey, but I hadn't considered those.
Not familiar with CM200/300 or PM400.
Is the implementation on the CDM and/or CM/PM radios a "full" implementation? I'll need to have a pin programmable as a COR/COS, another for PL detect, etc.
Thanks
Sam

Yes, the current production radios will support COR (CSQ detect) & PL Detect

escomm wrote:Yes, the current production radios will support COR (CSQ detect) & PL Detect

Which = RUS, receiver un squelch.

Just be carefull what version of the Pro CPS you use on the CDM, the latest version will only allow narrow band (12.5) operation unless you get a Key from Motorola to unlock wideband