Quantar wireline pre/de emphasis

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
spectrum3100
New User
Posts: 9
Joined: Tue Oct 23, 2012 1:04 pm

Quantar wireline pre/de emphasis

Post by spectrum3100 »

Does anyone know where in the audio chain the Quantar wireline falls? Is audio going in then pre-emphasised, is audio coming out de-emphasied, or is everything flat? How does the RSS pre/de empahsis selections affect wireline, if at all. Thanks
Top
User avatar
Astro Spectra
Posts: 669
Joined: Sat Sep 22, 2001 4:00 pm

Re: Quantar wireline pre/de emphasis

Post by Astro Spectra »

The WL output follows the RSS setting.
Top
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Re: Quantar wireline pre/de emphasis

Post by Will »

Astro Spectra wrote:The WL output follows the RSS setting.
Normally set for pre empahsis TX, and de empahsis on RX.
Top
spectrum3100
New User
Posts: 9
Joined: Tue Oct 23, 2012 1:04 pm

Re: Quantar wireline pre/de emphasis

Post by spectrum3100 »

Thanks!
Top
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”