Batboard

Hi,

I have a GM1200 M01RFL9CK4CN.
For programming I use the RSS R00.01.15 and R00.01.10

I can read the rig, but when I want to programm the Motorola, I see QSC in the Display and the rig makes a reboot.
What am I doing wrong?

Nothing.
What´s the problem?

Andreas

I cant programm the rig.

If I push the programm button, the Radio do a restart and I get a error message from the software. "Rig not connected" or "not possible".

Hi!
You should try it with another PC.Don´t run it on Win7 or higher.Sometimes even Win XP makes trouble.

Andreas

Okay,

I try it atm on a Windows XP machine, will test a other PC.
But the Software ist the right one for the rig?

Hey,

now I test it with GVN6007K.

If I read the Codeplug from the GM1200, I geht this Error: Codeplug Spec Number not supported by this RSS.

And when I create a new Codeplug with GVN6007K and write this one to the GM1200, I geht this Error: Not enough network files loaded

What is the right DOS RSS for this radio?

You have to create a simple Network with the network editor and load it with the RSS.

Andreas