Batboard

Programming CDM 1550 Conventional(R06.12.08). Have appropriate Scan List selected under Scan Tab for each personality in Zone.
I have 4 channels listed in the corresponding Scan List - these scan OK. Problem is that the manually selected channel(in that Zone) is not being included with the other scanned channels.
Any help appreciated. Thank you.

radmano wrote:Programming CDM 1550 Conventional(R06.12.08). Have appropriate Scan List selected under Scan Tab for each personality in Zone.
I have 4 channels listed in the corresponding Scan List - these scan OK. Problem is that the manually selected channel(in that Zone) is not being included with the other scanned channels.
Any help appreciated. Thank you.

In addition to the four channels you want to scan, make sure <Selected> is also in your scan list. If you want the selected channel
to be the priority channel, set Line 1 of the scan list to be Selected. It is one of the choices in the drop down list.