Page 1 of 1
MODAT problem on Astro Saber 3
Posted: Fri Jul 26, 2013 8:33 am
by WA6PMW
I have an Astro Saber 3 using CPS R05.02.00
I am not using MODAT.
I recently moved a few personalities around and when I tried to save the changes
I keep getting an error in the MODAT emergency revert table.
Anybody else ever run into this?
Bill Moulton
WA6PMW
Re: MODAT problem on Astro Saber 3
Posted: Fri Jul 26, 2013 10:36 am
by sjxts3000
Do you have at least one MODAT personality in the codeplug? (if not, you need to).
Just create a new zone by itself and park a MODAT personality there...then save and write.
Re: MODAT problem on Astro Saber 3
Posted: Sat Jul 27, 2013 7:14 am
by WA6PMW
I have never used MODAT.
What Info do I need to enter in that personality?
Re: MODAT problem on Astro Saber 3
Posted: Sat Jul 27, 2013 8:23 am
by sjxts3000
WA6PMW wrote:I have never used MODAT.
What Info do I need to enter in that personality?
Don't enter anything...just create a dummy personality with non-working frequencies. You don't need to actually use that MODAT personality...but you need to have at least one personality configured for MODAT when using that Flashcode config.