Page 1 of 1
CommandPlus Console Old Firmware
Posted: Tue Aug 20, 2013 3:23 pm
by Two Tone
So I obtained an older Motorola CommandPlus console from an auction for about $50. It works great, however the software package I purchased from GAI-Tronics (Moto no longer supports i suppose) does not support the older firmware. Currently installed is "CPK1F HOST3H MAST2G". I called GAI-Tronics and after talking to several people, they were not able to help find a solution. Hoping someone here might be able to point me in the right direction, or am I SOL?
-Thanks!
Re: CommandPlus Console Old Firmware
Posted: Wed Aug 21, 2013 8:56 am
by alex
Two Tone wrote:So I obtained an older Motorola CommandPlus console from an auction for about $50. It works great, however the software package I purchased from GAI-Tronics (Moto no longer supports i suppose) does not support the older firmware. Currently installed is "CPK1F HOST3H MAST2G". I called GAI-Tronics and after talking to several people, they were not able to help find a solution. Hoping someone here might be able to point me in the right direction, or am I SOL?
-Thanks!
My understanding is you have to purchase new firmware to bring it up to date. It's about $660 last I inquired about this. I've also heard that CARDS is supposed to just work even with the really old consoles.
Alex
Re: CommandPlus Console Old Firmware
Posted: Thu Oct 03, 2013 3:11 pm
by firedog359
Hi,found this thread looking for some commandplus stuff.Do you still need the original Moto software?